Mavic Crossride 2012 MTB Wheels
The access to the Mavic mountain bike performance.
Entry level at Mavic always means quality, efficiency and reliability. Completely endorsed by the Crossride - an incredible value!
Access to the Mavic quality:
• Reinforced rims: H2 compression
• Hub quality: FTS-X freewheel, QRM bearings
• Resistant straight spokes
Access to the Mavic efficiency
• Optimized component design
Access to the Mavic identity
• Large and visible graphics on the disc brake specific rim
• Straight pull bladed spokes
Weight:
• Weight: 1905 grams per pair
• Front wheel: 885 grams
• Rear wheel: 1020 grams
Rims:
• Colour: black anodised
• Disc brake specific profile
• Drilling: traditional
• H2 technology
• Internal width: 19 mm
• Joint: pinned
• Material: 6106 Aluminium
• Valve hole diameter: 8.5 mm
Spokes:
• Colour: black
• Count: 24 front and rear
• Lacing: front and rear crossed 2
• Material: steel
• Nipples: brass, self lock concept
• Shape: straight pull, bladed, section 2.0
Hubs:
• Colour: black
• Front and rear axle material: steel
• Front and rear bodies: aluminium
• Front axle size: 9x100
• FTS-X, steel
• QRM
• Rear axle size: 9,5x135
Technologies:
• FTS-X: Force Transfer System X - A further improved FTS free wheel system to meet the demand of intensive MTB riding as closely as possible: strengthened pawls, self locking axle end screw to make the freewheel mechanism even more hard wearing and a new seal halving friction torque.
• H2: Hammer Hardening - Local strengthening of the rim in the area where the spokes exert the greatest stress. This improves rim's life expectancy and resistance to micro cracking.
• QRM: Qualité de Roulements Mavic (Mavic bearings quality) - Mavic only uses high quality sealed cartridge bearings. On QRM wheels, they provide high durability thanks to double sealing (2RS or LLU) as well as high efficiency thanks to C3 internal clearance (low play, tight tolerances).
• Self Lock: The special shape of the spoke end, on the thread, makes it impossible to loosen. The spokes stays tightly screwed into the nipple, no tension loss is occurring. As a benefit, the wheel keeps its original roundness for a long time and does not get out of true.
Compatibility:
• Disc brakes: Center-Lock, delivered with 6 bolts adapters
• ETRTO size: 559x19C
• Front wheel mount: Quick Release
• M10
• Rear wheel mount: quick release
• Recommended tire sizes: 1.5 to 2.3
• Tire: tube type
What’s in the box?:
• BR101 quick releases
• Rim tape
• User guide and warranty card
• Valve reducer
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: